Product Range Trennex® Die Lubricants

Die Lubricants Micro -/ Minimum-Quantity-Spraying

 

Water based

Trennex MS W 060 Series

Form liquid

Color white

Application 
Release agent specially developed for the Minimum Quantity Spraying for aluminium and magnesium die casting. Due to the additives used, an effective release film can be achieved even at mold temperatures above 300°C. It is either applied undiluted and dosed as low as possible, slightly diluted, or in combined use with water-miscible release agents. Optimized for low residue formation, easy washability as well as heat treatment, a wide range of applications is covered.

Trennex W 3600 [polysiloxane free - wax-free]

Form liquid

Color white

Application 

  • Polysiloxane- and wax-free release agent for non-ferrous metal die casting.
  • Trennex W 3600 is used undiluted, but can also be diluted with water if required.
  • It is particularly suitable for castings that are coated, welded or bonded and is also suitable for structural cast parts that are not heat-treated, as well as electronic housings and magnesium components.

Trennex CI 7 B [polysiloxane free]

Form liquid

Color white

Application

Polysiloxane-free release agent based on Trennex CI 7, specially developed for Minimum Quantity Spraying, which can be used undiluted or slightly diluted with very small application quantities. It is particularly suitable for thin-walled castings that must be free of complaints regarding galvanization and painting and therefore especially for structural parts that are not heat-treated.

Water free

Trennex 3000 [polysiloxane free]

Form oil

Color yellow

Application 

Non-water-miscible, pigment-free release agent for minimum quantity spraying, which is applied undiluted and with very small application quantities. Combined use with water-miscible release agents is also possible. It immediately wets the mold surface and forms a highly effective protective film on the die. The castings have a high surface energy and can be coated and glued very well.

Trennex 3386

Form oil

Color yellow

Application

Non-water-miscible, pigment-free release agent for aluminium and magnesium die casting, which is applied to the mold surface undiluted and in very small application quantities. It can be used for Minimum Quantity Spraying as well as in combination with water-miscible release agents. It immediately wets the mold surface in almost all temperature ranges and ensures an optimum release and lubricating effect.

Electrostatic Application

Trennex VM 3389

Form liquid

Color yellowish

Application

Non-water-miscible, pigment-free release agent for aluminum and magnesium die casting, which is applied to the mold surface undiluted and in minimal quantities. It has been specially developed for Electrostatic Spray Applications, but can also be used as a Minimum-Quantity-Spraying-Product in classic spray processes, as a start-up oil or in combined use with water-miscible release agents. Trennex VM 3389 wets the mold surface immediately and with low fuming, forming a highly effective protective film that prevents the metal from sticking and ensures easy, problem-free ejection of the casting. Negative influences during electroplating, painting, etc. are not known.

Trennex VM 3390

Form oil

Colur yellow

Application

Non-water-miscible, pigment-free release agent for aluminum die casting. It can also be used as Minimum-Quantity-Spraying-Product, as well as for spraying at high pressures or in combination with water-miscible release agents. Specially developed for electrostatic spraying applications, it can also be used in classic spraying processes and immediately wets the mold surface in almost all temperature ranges and is characterized by very good temperature resistance and adhesion.

Do you have questions about our products?

Our competent service team is at your disposal.

Address

Austraße 45
PO box 1847
74076 Heilbronn, Germany

Call us

+49 (0) 7131.1563-0