Product Range Trennex® Die Lubricants

Die Lubricants Oil Based/Water Free

From the traditional paste to the high-tech lubricant for Minimum Quantity Spraying: the water-free Trennex® products offer the best solution for every application – they are gentle on the die and are easy to handle.

 

Aluminium paste form

Trennex AL

Form paste

Color  black

Application 
Specially formulated paste that is designed to be used for the initial treatment of new or reconditioned dies. 
Application of Trennex AL should be repeated tor the first 10 to 15 shots or until a uniform black coating is obtained on all parts of the die.

Trennex ALSI [paste form]

Form paste

Color silver

Application
Aluminium pigmented die lubricant that is designed to be used in standard production. It must be applied manually.

Trennex 3282 [paste form]

Form paste

Color  yellow

Application
Pigment free paste release agent used in current production. It is applied manually to the die surface.

Aluminium liquid

Trennex VP 64/4 [liquid]

Form liquid

Color yellow

Application
A non-water mixable pigment-free release agent for aluminium die-casting. 

In most cases, Trennex VP 64/4 flüssig is used in connection with watermiscible die-release agents. Trennex VP 64/4 flüssig is to be used in undiluted condition. The quantity applied should be kept as small as possible.

Magnesium

Trennex VM 3009 [polysiloxane free]

Form liquid

Color yellow

Application
Polysiloxane-free release agent for cast parts with high demands on surface quality. The castings can be well bonded or coated. 
Should be applied in very small quantities and using a suitable spraying tool

Zinc

Trennex VM 950 ZN Series [liquid]

Form liquid

Color blue

Application

  • Mineral oil-based release agent and lubricant for Zn die casting.
  • Can be supplied in different concentrations to suit requirements.

Trennex 3098 ZN [liquid]

Form liquid

Color clear

Application 

Trennex 3098 ZN liquid is a non-water mixable release agent especially developed for Zn pressure die-casting. It can either be used in its original condition. 

Trennex 3098 ZN liquid finds use in such cases where shining and perfect metal surface of castings is imperative and where subsequent surface treatment will take place. Negative influence with regards to electroplating, lacquering, etc., has not been experienced.

Trennex 3077 ZN [liquid]

Form liquid

Color clear

Application 

  • The extremely good release effect allows very small application quantities.
  • Suitable for high-speed systems due to its minimal tendency to leave residues.

Do you have questions about our products?

Our competent service team is at your disposal.

Address

Austraße 45
PO box 1847
74076 Heilbronn, Germany

Call us

+49 (0) 7131.1563-0